What the robot can do:

What this robot can do:

• The robot has different articulations around the body with servomotors, this make the robot moves with good precision.
• The robot has 2 speakers to make sounds
• The robot has 2 cameras in his face to detect colors, and objects.
• The robots has Wi-Fi (IEE 802.11g) to be connected to the internet.
• The robot has a lithium battery to be working at distance
• The robot has a motherboard that controls all the other complements.
• This robot can detects you voice with the 4 microphones that have in his head.

Budget cost form:

Budget cost form:

	N°	Component/Activity	Description	Cost	Number of pieces
		Acid Ferric	This kind of acid is used to eliminate the excess of cooper in the Bakelite	$                39.00	X2
		Acrylic	This material is similar to crystal but is more resistance and lighter	$                99.00	X1 meter
		Arduino	This is a microcontroller platform, it’s like the brain of the project. We will use that to control all the dispositives.	$             300.00	X1
		Bakelite	This material is used to make the circuits of the project.	$                40.00	X1 30cm
		Water Bombs	The water bombs are used to collect the water and fill in the glass	$                  70	X5
		Cable	The cable is going to be to connect all the circuits with the bombs, servomotor and sensors.	$                  9.00	X1 5meter
		Display	The display is a little screen that shows numbers. We will going to show the number of full glasses.	$                55.00	X1
		Hose	This hose will going to be with the water booms to fill the glasses	$                15.00	X1 6meter
		RGB Sensor (tcs 3200)	The RGB sensor detects the different color of the glasses	$              175.00	X1
		Servomotor	The servomotor is a motor that you can control. This will move the base with the glasses	$              162.00	X1
		Screws	They will be in all of the structure of the project	$                  1.00	X40
		Relays	This dispositive is a switch to turn on and turn off the waterboms and the servomotor	$                  30.00	X5
			Total:	994$	1554

Integrator Project

Integrator Project:

Our integrator project is a prototype about an automatic water dispenser, this prototype is thought out to be in the restaurants to fill the water glasses with different kinds of liquids in a very low time. We are satisfied with our project because we think that is very functional for the and maybe tomorrow the restaurants will be more ‘automatic’ than now. This is the future of the world, use the technology to make our life’s easier. 

In our project we implement activities like program, cut, measure, design, investigate and others. First we design and investigate more about our project, how it can be more effective lighter and easy to use, then we start to build up the project cutting, measuring the physical parts. Then we start to program de Arduino that controls the dispositive of the project like the water bombs and the servomotor. Now we are in process to finish that.

Now we are trying to test all the dispositive of the project and doing little changes of the physical parts to improve the project. 

How to change a flat tire

1.- The first thing you need to do is park the car whith flashing lights and put on the parking break.

2-. The next part you need to do is Collect the tools to change the tire. The Jack, wheel tools and the new wheel.

3-. Put on the Jack under the frame of the wheel you want to change.

4-. Then you need to loosen the nuts with the with the cross key

5-.Lift the car using the Jack till the tire wheel stays full up

6-. Remove the nuts of the flat tire and then remove the flat tire

7.- Put the new tire and thighten the nuts a little bit in order, adjusting in pairs the opposite nuts.

8-. Lower the vehicle

9-. Using the cross key thighten the nuts with strenght

10-. Save all the tools

Diagram: 

Articles for the project

Integrator Project

Integrator Project
Team number		# 6
Group Members		1. Daniel Becerril 2. Verónica Vázquez 3. Carlos Cañedo 4. Yerady Lara 5. Mauricio A. Altamira Jasso (me)
My responsibilities
My first responsibility in the project is investigate about the servomotors and how it functions, and investigate about the electro-valves or mini water bombs that we will going to use in the project
Scope
Our project is and multiple water dispenser. This prototype has a RGB sensor, used to recognize the colors of the different glasses that we have, and introduce different flavors of water or soda in the glass. I think this is a great idea to save time for the waiters of the restaurants.
Communication strategies
I think the best strategy to have a faster communication, is use the internet like Facebook or other online networks, but sometimes you lose much time there distracted. The best for me is been in the same place working.

Advantages and Disadvantagues of have a blog in the class:

Advantages:

• Faster conection with our friends, and with professors.
• You can share information easy, about our carrear or interesting things.
• We can know more about our friends, like they personal interest
• The information of the blog is always there, you can information find when you want.
• If you didnt come to class, you can see what activitys they made.
• You can work with your partness, even if they are in diferente places.

Disadvantages:

• Sometimes you lose more time doing thinks like playing or watching things on internet
• You need to know that other people (persons that you dont know) can watch your personal information, this incress your risk os been cheated.
• Sometimes the real connection face to face is changed for internet social connection.

Links to find more information about it: :) 

• http://socialnetworking.lovetoknow.com/Advantages_and_Disadvantages_of_Social_Networking
• http://www.shrm.org/templatestools/hrqa/pages/socialnetworkingsitespolicy.asp

Video: 

Hello World!:

Here is my first post on this web site. mi name is Mauricio Alfredo Altamira, im studing mecatronics, i love the technology and how this make easy our life. But I also love the music, i think is very important to express what you think, and music is a good way to do it.

I  Almost Like every style of music but my favorite style of music is rock, i been playing guitar for 3 years. and here i want to talk about my favorites bands.

1-. One of my favorite is Blink 182, i listen this band since i was a kid. Blink 182 is a punk rock band, they lyrics are very simple, funny and emocional like adolecent love. my favorite Songs os Blink are; Dammit, First Date. I miss you, The rock Show, Roller coaster. Now i grow up but still been one of my favorites.

2.- Other band that i love is Oasis. I think oasis is great band beacause their music makes you feel better when you feel sad, their lyrics are more "mature". my favorite songs are Stand by Me, Dont go Away, Talk tonight, Wonderwall, Stop crying your heart out.